Name: STARK 4040/8040 Stainless Steel Ro Membrane Housing
Brand: GETM
Availability: InStock
Rating: 4.8 (61 reviews)

도매 4040/8040 스테인레스 스틸 Ro 멤브레인 하우징 중국 공급 업체

WhatsApp에 오신 것을 환영합니다.

STARK 4040/8040 Stainless Steel Ro Membrane Housing

STARK 4040/8040 스테인리스 스틸 Ro 멤브레인 하우징

The stainless steel membrane housing is the basic component of the reverse osmosis equipment. The material is made of 304 stainless steel seamless pipe. According to the sealing form of the end cover, it is divided into: clamp type, flange type, and built-in type; according to the water inlet method, it is divided into: end inlet and side Enter. The length is matched with the number of reverse osmosis membrane components; the inside and outside of the product are polished, beautiful and practical, and the working pressure meets the normal operating pressure requirements of the reverse osmosis system. Stainless Steel Ro Membrane Housing

견적 받기

생산물 기술

Performance characteristics 스테인레스 스틸 멤브레인 하우징
The 4040 membrane shell is divided into two types: seam and seamless. It is made of SUS304 stainless steel. Both ends are sealed with ABS heads and silicone O-rings, which have high sealing performance and long service life.
8040 membrane housing: divided into two types, card sleeve and end cap type, made of SUS304 seamless stainless steel tube, good sealing performance, high pressure resistance, no aging, easy installation and cleaning of the membrane, working pressure (Mpa): 4.0.
The water inlet and outlet of the membrane shell can be in (out) or side in (out) according to customer requirements. Stainless steel membrane shells are 2.5 inches, 4 inches, 8 inches, etc.,
The 1.4-inch RO membrane shell has a series of 1 core, 2 cores, 3 cores, and 4 cores.
2. Membrane shell tubes are divided into two types: seam tubes and seamless tubes.
3. There are two ways to connect the water inlet and outlet: side inlet and end outlet and end inlet and end outlet; the specifications are 6 points x 4 points and 4 points x 4 points.
4. The material of the head includes ABS and stainless steel.
스테인레스 스틸 Ro 멤브레인 하우징

생성물 파라미터

Technical characteristics
Pressure resistance: 2.0～2.5MPa
Water inlet method: water inlet at both ends, water inlet at both sides
Structure: standard spare parts, convenient and quick to disassemble
Tightness: After pressure test
Organization structure at both ends: clamp type, card type, inner spring type.
Water inlet: 3/4" internal thread
Outlet: 1/2" internal thread
O-ring material:EPDM,with NFS certificate
Max working temperature:90℃